ASSEMBLY INSTRUCTIONS
6
G
1. After waking up the panel, press the "0" key twice, and then press the setting
key to enter the management password setting, After entering the 4-8 password
Press # to confirm, the buzzer drops 2 sounds and then enter again, then press
3. If the password number is not within the specified range when entering the
passwor
d, or if the password is not the same as the first time when entering
the password for the second time, press # to confirm, the buzzer will beep
three times, exit the setting mode. The setting fails and needs to be reset.
VI. Set the two-factor authentication mode:
1. In the standby state, press the setting key twice. When you hear a beep,
the green light is on, and the dual authentication mode is enabled.
"Beep" two sound, cancel the dual authentication mode;
"Beep" three times, empty fingerprint, cannot set dual
authentication mode
2. The door can be opened only after the password and fingerprint are verified.
VI. Mute function:
1.Wake up the panel, press #00*, hear "beep" two times at the same time
turn off the mute function, wake up the panel, press #00* key, without sound, open
the mute mode.
# to confirm.
