ASSEMBLY INSTRUCTIONS
1
2
ASSEMBLY INSTRUCTIONS
● Place on a flat surface.
● Ensure all latches are locked.
● Ensure the waste holding tank is assembled correctly and the cap
is screwed on correctly.
● Weight bearing limit is no more than 200 kg.
● Do not lean on the seat cover during operation.
● Ensure water supply pressure is no more than 0.4Mpa.
● Do not use water with a temperature higher than 40 degrees.
1. Fill the tank with freshwater.
2. Open the slide valve.
3. Open the seat cover.
4. Pull the piston pump first and press it to flush.
5. Close the slide valve.
Caution:
Product Structure
Operation Instruction:
10L Fresh water tank
20L Waste holding tank
Latch assembly
Toilet lid
Piston pump
Water inlet
Slide valve assembly
Toilet seat
Level indicator
Drain outlet
Air release valve
