YILMAZ DK 502, User Manual, Page: 25 / 60

25
2.3.9 Unplug first, before conducting and maintenance works.
2.3.10 Ensure that any keys or adjustment tools have been removed before operating the machine..
2.3.11 If you are required to operate the machine outside, use only appropriate extension cables.
2.3.12 Repairs should be carried out by qualified technicians only. Otherwise, accidents may occur.
2.3.13 Before starting a new operation, check the appropriate function of protective devices and tools, ensure that they
work properly. All conditions have to be fulfilled in order to ensure proper operation of your machine. Damaged protective
parts and equipment have to be replaced or repaired properly (by the manufacturer or dealer).
2.3.14 Don’t use machines with improper functioning buttons and switches
2.3.15 Don’t keep flammable, combustive liquids and materials next to the machine and electric connections.
3. MACHINE’S DESCRIPTION
Machine is designed for the joining of PVC profiles though corner welding

Capable of adjusting the clamp and welding pressure according to the profile type.

Equipped with a timer for melting and welding time.

The thermostat is electronic and can be adjusted in a temperature range between 0
0
-260
0
C.

Welding seam between 0.2-2 mm.

The movable head (right head) moves manually. It is equipped with a brake system.

On the left head it is possible to weld at angles between 30°-180°. The right head is fixed at 90°.

For safety reasons, the clamp pistons operate with low pressure.
 After clamping the profiles, the welding is carried out automatically.

The machine has been designed according to CE Safety Directives.

Equipped with profile support device.

STANDARD ACCESSORIES OPTIONAL ACCESSORIES
User manual
Profile support apparatus
4. TRANSPORT OF THE MACHINE
4.1. The transport should be done by qualified personnel only.
4.2. The machine should be transported by lifting with proper equipment (not touching the ground during the transport).
4.3. Unless customer requests the contrary, the machine will be delivered with wooden packaging.
4.4. Movable parts on the machine should be fixed before carrying out the transport.
4.5. The machine size and weight measurements, given the technical specification sheet.
4.6. On the machine, the are places to carry the machine with suitable lifting eye bolts. During transportation of the
machine, Yilmaz supplied eye bolts can be used to lift the machine.with an appropriate lifting device. Please pay
attention not to give any damage to the machine during lifting.
4.7. In order to get more stability when hanging the machine in case of move it, hang it from bottom insofar. Move the
machine without shaking it in slow movements. Be sure to take care of persons in dangerous places.