YILMAZ CK 412, User Manual

Page: 18 / 32

35
5.2.6 After electrical connection is made, machine must be operated in idle running and it must be controlled whether
rotation directions of cutting tools are correct or not and if the rotation direction is wrong, appropriate connection
must be made.
6. MACHINE SAFETY INFORMATION
6.1 Lifting, installation, electric maintenance of the machine should be carried out by qualified personnel only.
6.2 Routine maintenance and scheduled maintenance should be carried out by qualified personnel after unplugging the
machine and disconnecting the air supply first.
6.3 Ensure that the machine has been cleaned, tested and maintain before starting to operate.
6.4
replaced defective safety devices or faulty parts.
6.5 Never replace the milling cutters before unplugging first.
6.6
parts
6.7 Do not work on the machine by removing the protective parts
The safety data have been defined above. In order to prevent physical damage or damage to the
equipment, please read the safety information carefully and keep the manual always in an easy
accessible place.