YILMAZ ACK 420, User Manual

Page: 39 / 61

2. SAFETY 38
2.2. Accidents Prevention
2.2.1 Our machines are manufactured in accordance with CE safety directives, which cover national and international
safety directives.
2.2.2 It is the task of the employer to warn his staff against accident risks, to train them on prevention of accidents, to
provide for necessary safety equipment and devices for the operator’s safety.
2.2.3 The operator must be accustomed to the position before starting work, ( He must have used similar machines
before ). The machine characteristics must be checked by the operator
.
2.2.4 Machine should be operated only by staff members, who have read and understood the contents of this manual.
2.2.5 All directives, recommendations and general safety rules contained in this manual have to be observed fully.
The machine cannot be operated in any way for purposes other than those described herein. Otherwise, the
manufacturer shall not be deemed responsible for any damages or injuries. And such circumstances would lead
to the termination of the warranty.
2.3. General Safety Information
2.3.1 The power cable should be led in such a way that nobody can step on it or nothing can be placed on it. Special
care has to be taken regarding the inlet and outlet sockets.
2.3.2 Don’t overload machines for drilling and cutting. Your machine will operate more safely with power supply in
accordance with the stipulated values.
2.3.3 Use correct illumination for the safety of the operator. ( ISO 8995-89 Standard The lighting of indoor work
system )