Your heater heats at maximum level until it reaches the set temperature.
If the set temperature is reached, it goes into standby mode.
If the ambient temperature falls below the set value, it will reactivate and heat.
7. Set Temperature Control
7.1 Standart mode
It contains a temperature sensor where it senses the
ambient temperature in the section where the air circulation
is located in your heater. Your heater transfers the medium
to the set temperature by making a comparison according to
the temperature detected by this sensor as a standard.
7.2 Room thermostat mode
There is one temperature sensor on your control panel to detect the ambient temperature. If
you switch your device to room thermostat mode, your heater will compare the temperature
perceived by this sensor and bring the environment to the set temperature.
To activate the room thermostat mode, consult your
Yılkar authorized service center or follow the instructions
specified in the installation instruction.
SET temperature setting range is between 10 °C and 35 °C.
Your heater starts showing the ambient temperature
it senses 300 seconds after starting the heating.
The term "temp" means that the ambient temperature
is displayed.
The term "temp" indicates that you are in Standard
mode.
The phrase "RTemp" indicates that you are in Room
thermostat mode.
7