background image

W A R N I N G   A N D   N O T E

NOTE: 

 

Instructions, which if not properly followed, would cause possible damages to property and/or little to no possible injuries.

WARNING:  

Skateboarding, like all sports, carries inherent risk or injury. The rider may lose balance and fall off while riding this electric skateboard, which would cause serious injury or 

even daeth. Always skate within your abilities. Learn to stop (slide) and don’t skate in traffic or other hazardous situations that may increase your risk.

The YIIBoard is designed for one-person riding.
Please always wear protective equipment such as helmet, pads etc. to limit your risk.
Please ride on flat pavement in open space. 
Please don’t try longboard tricks such as jump, slides to avoid injuries to yourself or damage to the board.
Please check your shoelace before riding and pay special attention not to let it get involved in wheels or power system which may cause fatal consequences.
Please ride with care and concentration. 
Please check the board condition before riding.
Please obey local laws, regulations and ride this electric skateboard where you are allowed to.
Please ride outdoor in suitable environment. Riders can speed up with remote after standing steadily on the board.

Never ride on rough roads with potholes, gallets, grits or silt or slippery grounds such as snowfield, ice ground to avoid falling off.
Never touch power wheel with bare hands while or once after riding. This could lead to burns and injuries.
Never use the board at night or under the condition of poor visibility.
Never ride in rain and snow.
Never use your mobile phone or earphone while riding.
Never place the board within the reach of children under 8 years old. Not recommended for children under 16 years old.
Never speed up in a rush.

Summary of Contents for Y-ES0201










Reviews: