M260 Series IP MODEM User Manual
Yifan Industry Co., Ltd.
Page 23 of 33
Tel: +86 592 6101492
Fax:+86 592 5222813
Email: [email protected] , [email protected]
Website: www.yifanwireless.com
3.3.4 Data Service Center Settings
Settings on this page are the parameters related to Data Service Center (DSC).
3.3.4.1 Data Service Center
IP MODEM support two Data Service Center methods to transmit data.
Main and Backup
: IP MODEM always tries to connect with the Main DSC. If fails to connect
with Main DSC, it will connect with Backup DSC at once
Note
：
If no Backup DSC exists, please configure the Backup DSC same as Main DSC.
Multi Data Service Center
: IP MODEM can connect with at most five DSC at the same time.
All the multi DSC can receive the same application data .
Reconnect Int.(s)
reconnect time interval in second
Connect Retry Times
reconnect times
Back To Main Server
This item is only valid when you set “Data Center Number” as 1. In
this mode, IP MODEM will switch to backup center when main center
have problems. If this item is set to 1 , IP MODEM will check whether
the main center work fine timely. When it detects the main server work
fine, it will return back to the main server at once.
If the Data Center Number is 0,there is no DSC working.
If the Data Center Number is 1, IP MODEM work in Main and Backup DSC method.
When “Data Center Number” is greater than 1, IP MODEM works in Multi Data Service Center
method. The back center is invalid. The IP Modem will connect to mulit Data Center and transmit
