Note matters:
1. To prevent high-frequency interference, do not install the sensor line bundled with the power line and
loaded equipment line, but should be separated wiring;
2. Supply voltage must be consistent with the rated voltage and the deviation is less than ± 10%. Strict
distinction between sensor installation, power line and Loaded output interface;
3. The temperature control host machine cannot be installed in the place where is dripping water, or the
elderly, children could be touched;
4. The wiring should be checked whether the line is correct, to avoid accidentally burn of temperature
control host machine and loaded equipment, installed applications supporting protection back cover
obscured;
Installation wiring diagram:
Make sure to install the loaded equipment's voltage is identify with temperature control host machine's voltage,
other wire the wire connection cannot according to this figure.
