background image

14. Waste disposal instructions

15. Electromagnetic compatibility warning

16. Symbol Description

17. Product accessories list

The information "Lo" or "Hi" appears in the following situations 
for reference:

■ Disposing electronic products and batteries directly in the trash 

   can cause harm to the environment. Please dispose of them in 
   accordance with the laws in your area.

■ Do not discard the non-contact electronic thermometer at the 

    end of its use. Please dispose of it according to the laws in your 
    area, or contact the manufacturer for recycling.

■ The non-contact electronic thermometer meets the requirements 

   of IEC60601-1-2:2004 standard electromagnetic compatibility.

■  The user should install and use the electromagnetic compatibility 

    information provided in the random files.

■  Portable and mobile RF communication equipment may affect 

    the performance of non-contact electronic thermometers, and 
    avoid strong electromagnetic interference when using, such as 
    near mobile phones, microwave ovens, etc.

■  Guidelines and manufacturer's declarations are detailed in the 

     attachment.

■  The equipment or system should not be used close to or stacked 

    with other equipment. If it must be used close to or stacked, it 
    should be observed to verify that it can operate normally in the 
    configuration in which it is used.

1 thermometer, 1 manual, 1 certificate, 1 pair of  7 battery.

Reasons for "Lo" or "Hi"

Advice

Temperature value is affected 

by hair and sweat.

Ensure no obstructions during 

temperature measuremen.

Temperature is affected by 

changes in airflow.

Ensure that the air remains stable 

during temperature measurements.

The measurement distance

is too far.

Please note that the measurement 

distance should not be greater than 5 cm.

Enter indoors from low or 

high temperature outdoors.

Please wait for 10 minutes and wait for 

the subject's temperature to adapt to 

the measurement environment before 

measuring.

Symbol Graphics

Meaning

Note, refer to the 

attached file

Refer to manual

BF type 

application part

Low voltage alert

Trash can

Meaning

Symbol Graphics

 Note:

Warning:

14

15

Summary of Contents for JT-E020












Reviews: