1. Download and Install the RFViewer software application from Y.I.C. website:
yictechnologies.com/rfscanner
.
The application must always be installed on the C: drive.
2. For Sweep scans, go to
http://www.keysight.com
, download and install the latest
version of the Keysight IO Libraries Suite.
Modes of Operations
Self-Emitting
If the device under test is self-emitting, connect the PC and RFScanner as per the diagram
below; no other equipment is required.
Self-Emitting setup
Frequency Sweep
If you are testing a passive antenna, connect PC,
RF
Scanner, network analyzer and
optionally power sensor as per the diagram below. The power meter is used to measure the
power source profile of the VNA, cable and connector up to the antenna under test for the
test frequency range to obtain accurate gain and efficiency results.
