3.4 System Settings
3.4.1 Standard: NTSC/PAL
3.4.2 Wi-Fi Info
Tap the ‘Wi-Fi Info’ bar to see the Wi-Fi SSID and Wi-Fi password.
3.4.3 Wi-Fi Channel
You can set the volume for the sound indicator to be High (default), Low or Mute
3.4.4 LEDs
You can switch the light indicator on/off.
If the switch is on (default), when the camera is recording, the status lights will be red and
flash. When the camera is done, the red status light will be solid.
3.4.5 Beep: High/Low/Mute
3.4.6 Language: CN/EN
3.4.7 Format SD Cards
3.4.8 Reset camera
With this setting, you can reset the camera to their default settings.
3.4.9 Auto Power Off
With this setting, you can set the time to auto power off. The value is set to ‘3mins’ by
default.
4. Recording
This section explains the recording basics.
4.1 Preparing to Record
1. Make sure there is a microSD card in the camera.
2. Power on the camera.
3. Confirm the current camera mode.
4. Adjust settings.
