Call:
+44 (0)1268 570900
Fax:
+44 (0)1268 732509
Email:
Visit:
www.yewdale.co.uk
3
R20M Electric 24v DC:
1
.
The standard universal metal brackets supplied with the blind may be top,
face or side-fixed. Fix the brackets in place using the appropriate screws/
plugs.
2
.
Check that the blind fits correctly. The pin-end is sprung for easy fitting, but
the pin should be depressed once in place. The fabric should roll off the back
of the barrel, unless the blind was ordered reverse-roll.
3
.
Fix the control-end bracket using appropriate screws/plugs.
4
.
Locate the blind in the control-end bracket, and mark the position of the pin-
end bracket.
5
.
Remove the blind and fix the pin-end bracket using appropriate screws/
plugs.
NB.
To operate correctly, the blind MUST be fixed level.
6
.
Insert the pin in the pin-end of blind into the bracket. Press the blind against
the bracket to depress the sprung pin, and insert the lug on the control-end
into its bracket until it drops into place.
7
.
Ensure the relevant child safety device is used to comply with BS
EN13120:2009+A1:2014, BS EN16433:2014 and BS EN16434:2014.
8
.
For programming instructions, please refer to enclosed leaflet.
NB.
Large blinds are heavy and it is important that the correct fixings are used.
If unsure, seek expert advice.
