YewdaleDefiant
®
fitting instructions
Part no: 936
10
Fitting Instructions
YewdaleDefiant
®
roller blinds (R20, Fascia, R20C, R20D, R20S, R20W)
R20D Double roller:
N.B
.
This blind should be installed by a person competent in DIY. If in doubt
please consult a professional.
1
.
The standard universal metal brackets supplied with the blind may be top or
face-fixed.
2
.
Check that the blind fits correctly. The pin-ends are sprung for easy fitting,
but the pins should be partially depressed once in place. The fabric should
roll off the back of the barrel, unless ordered reverse-roll.
3
.
Fix one of the brackets using appropriate screws/plugs.
4
.
Locate the blind in the control-end bracket, and mark the position of the
other bracket.
5
.
Remove blind and fix the bracket you’ve just marked out using appropriate
screws/plugs.
6
.
Insert the pin in the pin-end of blind into the bracket. Press the blind
against the bracket to depress sprung pin, and insert the lug on the control-
end into its bracket until it drops into place. Repeat for the second blind.
N.B
.
For child safety device fitting instructions, see Point 7 on Page 5.
