YewdaleDefiant
®
Manufacturing instructions
Part no: 2008
6
Manufacturing Instructions
YewdaleDefiant
®
cassetted blinds (C44-90)
9
.
Insert the transition plates into the head box making sure the gear is on the
control side and attach the end plates using 933010 screws.
10
.
Insert the gear drive and pin end into the barrel and place barrel and fabric
into the head box.
11
.
To drill the holes for the safety screws at either end of the head box cover,
use the template provided. Mark the hole shown below with a pencil. When
marked, remove the template and drill a 4mm hole and countersink.
12
.
Attach head box cover onto the head box, close and secure using the two
safety screws (933010).
13
.
Assemble the control rod using the necessary components.
14
.
Lift head box onto text rig and ensure blind operates correctly.
15
.
To transport blind, it is recommended that the barrel with fabric is removed
from the head box and packaged separately.
Use this
hole on the
template
