YewdaleDefiant
®
programming instructions
Part no: 980014
6
Programming Instructions
YewdaleDefiant
®
Motor Relay (980014)
Delete single channel memory:
Delete all memories on all channels:
The light will flash
for ten seconds.
The light will flash
for ten seconds.
The receiver’s light
will flash three times.
The receiver’s light
will flash 3 times and
then flash 3 times
again 7 seconds later.
Press the button on the
receiver that corresponds
with the motor you wish
to adjust.
Press the button on the
receiver that corresponds
with the motor you wish to
delete all memories from.
Press the directional
buttons on remote control
to select the channel you
wish to delete.
Press the directional
buttons on remote control
to select the channel you
wish to delete.
Press PROG for 1
second.
Press PROG for 7
seconds.
