Call:
+44 (0)1268 570900
Fax:
+44 (0)1268 732509
Email:
Visit:
www.yewdale.co.uk
3
First limit position setting:
Other limit position settings:
Press PROG on the
transmitter for 1
second.
Move the motor to the
desired position.
Press PROG on the
transmitter for 1
second.
Press PROG for 1 second
to save the limit position.
(If there’s no other action within 30 seconds. the motor will exit from the limit position preparation automatically)
(If there’s no other action within 30 seconds. the motor will exit from the limit position preparation automatically)
Motor will shunt once
to indicate limit stop
setting mode.
Press PROG on the
transmitter for 1 second.
Press UP adjusting the
motor to the required
position to set the UP
limit position as first
limit. Or press DOWN to
set the DOWN limit stop
as the first position.
Motor will shunt
once to indicate limit
setting mode.
Motor shunts once
again. The limit setting
has been saved.
Motor shunts once
again. The limit setting
has been saved.