Yetter TITAN Series, Owner'S Manual

Page: 14 / 24

14
MAINTENANCE
CAUTION: To help prevent serious injury or death to you or other caused by
unexpected movement, service machine on a level surface. Lower machine
to ground or sufficiently lock or block raised machine before servicing. If
machine is connected to a tractor, engage parking brake, place transmission in
PARK, shut off engine, and remove the key. If machine is detached from a tractor,
block wheel and use shop stands to prevent movement.
CAUTION: Do not clean, lubricate, or adjust a machine while in motion.
Use grease based on NLGI consistency number and the expected air temperature
range during the service interval.
Use a multi-purpose polyurea, water resistant, moderate speed, and NLGI grade
#2 grease.
Other greases may be used if they meet the NLGI Performance Classification: GC-
LB
Important: Some types of grease thickener are not compatible with others.
Consult your grease supplier before mixing different types of grease.
Conditions in certain geographical areas may require special lubricants and lubrication
practices which do not appear in the operator’s manual. If there are any questions,
consult Yetter Manufacturing Co. to obtain the latest information and recommendation.
Part # Description
Ounces of
Grease
2967-404
13” Taper Tooth RM Wheel
1.12 Oz
2967-602
13” SharkTooth RM Wheel
1.12 Oz
2967-186 Floater Wheel Kit w/ RM Wheel 2.08 Oz
6200-350
6200-351
Bevel RM Wheel w/ Floater Wheel Kit 2.40 Oz
Storing Lubricants
Your machine can operate at peak efficiency only if clean lubricants are
used. Use clean containers to handle all lubricants. Store them in an area
protected from dust, moisture, and other contaminants.