11
INSTALLATION INSTRUCTIONS
1200 SERIES ROW UNIT
Step 2:
Attach the front of the Main Mount Bracket to the planter row unit by using the same set of holes that the scrapers were mounted
in using 4) 5/16 X 1 ¼ carriage bolts & 4) 5/16 flange lock nuts. Attach the triangular mounts & triangular mount spacers to the row unit using
4) 5/16 X 1 ½ carriage bolts & 4) 5/16 flange lock nuts. Attach the rear firming wheel & compression spring to the rear of the main mount
bracket using all original parts & hardware with the exception of the spring pin & hairpin cotter.
DO NOT
attach the closing wheel spring &
spring holder to the Main Mount Bracket until after the fertilizer wheel mounts are installed in step 3.
2100 SERIES ROW UNIT
Step 2:
Attach the front of the Main Mount Bracket to each planter row unit using the 4) M16 X 40 bolts. Attach the rear firming wheel
using 1) 5/8 X 9 bolt, 2) 5/8 flat washers, & 1) 5/8 lock nut. Attach the compression spring to the rear of the main mount bracket using 1) ½
X 6 bolt, 2) ½ flat washers, & 1) ½ lock nut.