Yetter 2968-026, Set-Up / Parts Manual, Page: 17 / 40

17
INSTALLATION INSTRUCTIONS
NOTE: If installing 2968-090 Rear Knife Option, use that manual to finish installation from this point.
Step 5: Place a 5/8 flat washer over the D-bolt & install the Fertilizer Wheel Assembly to the
Fertilizer Wheel Mount Plate & tighten 5/8flange whiz lock nut. See page 19 to determine
which D-bolt hole to install the wheel assembly to achieve your desired depth.
SINGLE WHEEL (RH Shown) DUAL WHEEL
Step 6: Set each Fertilizer Wheel Assembly to the desired spacing off the row (2” – 3”) & then
tighten the 3) ½” bolts from STEP 4 .
SINGLE WHEEL DUAL WHEEL WHEEL ADJUSTMENT