Device on / off button
Button
Function
Pressing once will turn on/off the device
Buttons responsible for setting the temperature inside the device
.
A single press increases the temperature
A single press lowers temperature
Pressing it once will change the cooling mode from ECO (energy saving) to MAX (fast cooling).
Default setting for fast cooling (MAX)
Press and hold to change between battery protection modes (when powered from a 12 / 24V socket in
motor vehicles): H (high protection) / M (medium protection) / L (low protection).
Default set to high protection (H).
When connecting the device to the application via Bluetooth:
Pressing once, when the "AP" message appears on the device control panel, will enable its connection
with the application on the external device.
Temperature reduction
button
Temperature increase
button
Settings button
Changing the temperature scale on the control panel
(°C/°F)
With the device turned off, press and hold the button until the message E1 appears Then press the button several times
until the content of the message changes to E5. Use the button or to switch between the ° C and ° F temperature scales. Turn
off the device using the button to save the setting.
Operating the device from the application level (Android / iOS)
The application
Yeticool
can be downloaded from the GooglePlay store (for Android devices) or AppStore (for iOS devices). For
the proper operation of the application, it is required to turn on the Bluetooth function and the location function on the external
device.
To connect to the application, launch it on an external device (smartphone / tablet), search for and select the fridge from the list of
available devices. The refrigeration appliance control panel will display "AP", which must be confirmed by pressing the button .
The device should be ready for receiving commands from the application.
6. Operating
Changing refrigerator lid direction
To change the lid direction, open and tilt it at an angle of 20°, and then slide it upwards. The lid should be turned and
inserted into the openings in the housing on the opposite side of the device. Before starting the device, make sure that the
lid has been installed correctly and that it closes properly.
Operating the device
from
control panel
Device
on/off
button
Setting
button
Temperature increase
button
Temperature decrease
button
USB port for charging
external devices
such as smartphone / tablet
Current temperature
inside the device
Temperature
scale °C/°F
Battery
protection
mode (H/M/L)
The voltage
at the current
reaching the device
Cooling mode (MAX / ECO)