34.
WARRANTY
YETI LIMITED (5) FIVE YEAR FRAME WARRANTY
(applies to SB5.5 / SB5 / Beti SB5 / SB5+ / SB6 / ASR / Beti ASR / Infinity Link)
Yeti Cycles will repair or replace, at its option, any frame it determines to be defective due to
defective materials and/or workmanship. The (5) one year limited warranty is conditioned upon
the bicycle being ridden under normal conditions and having been properly maintained. This
warranty does not apply to the components attached to the frameset such as suspension
components, wheels, drive train, brakes, seatpost, handlebar and stem. This warranty applies
only to the original owner and is non-transferable. This warranty is void if the bicycle was not
properly assembled by an authorized Yeti dealer.
ADDITIONAL CONDITIONS
These limited warranties do not apply to normal wear and tear, nor to claimed defects,
malfunctions or failures that result from abuse, neglect, improper assembly, improper
maintenance, alteration, collision, crash or misuse. The original owner shall pay all labor
charges connected with the repair or removal of all components. Under no circumstance does
this limited warranty include the cost of travel or shipment to and from an authorized Yeti dealer.
In order to exercise your rights under these limited warranties, the bicycle or frameset must be
presented to an authorized Yeti dealer, together with proof of purchase.
*The above warranties have been in effect since January 2012. For warranty information on Yeti
frames sold prior to that date please consult your local authorized dealer.
NO FAULT REPLACEMENT POLICY
Yeti Cycles will make replacement parts available at a minimum charge to the original owner in
the event of a crash or any other non-warranty situation. Yeti Cycles does this at its sole
discretion and reserves the right to refuse this offer.
PRODUCT LIFE CYCLE
Every YETI frameset has a useful product life cycle. The length of that useful product life cycle
will vary depending on the construction and the materials of the frameset, maintenance and
care the frameset receives , and the amount and type of use the frameset is subjected to over
its life. YETI recommends that an authorized YETI dealer should inspect the frame for stress
annually. Frame stress could cause potential failure and the signs are usually apparent in the
form of cracks, fracture lines, deformation, dents, and any other visual indicators of
abnormality. These safety checks for frame stress are important to prevent accidents, injury to
the cyclist, and product failure of a YETI frameset.
DISCLAIMER
YETI Cycles is not responsible for any damages to you or others arising from riding,
transporting or other use of your bicycle. In the event that your frame breaks or malfunctions,
YETI Cycles shall have no liability or obligation beyond the repair or replacement of your
frame pursuant to the terms outlined in the warranty.
*If you have a warranty concern, please contact your authorized Yeti dealer.
YETI CYCLES
621 Corporate Circle, Unit B
Golden, CO 80401
(p) 303-278-6909
(f) 303-278-6906
www.yeticycles.com
BUSINESS HOURS
Monday-Friday
8AM-11:30AM, 1:00PM-5:30PM
(Mountain Time)
Summary of Contents for SB6C
Page 1: ...OWNER SMANUAL YETISB6C...