SB135
|
OWNER’S MANUAL
12
Press both upper bearings into the link from the inside of the link tabs using a 15x24mm arbor.
Check that both bearings are fully seated.
Press the drive-side lower bearing into the link using a 15x24mm arbor, fully seating the bearing
into the link.
Install the lower bearing spacer against the pressed lower bearing. Press the non-drive side
bearing into the link until bearing bottoms against the spacer
BEARING PRESS ASSEMBLY
1
2
3
3
2
1
LINK BEARING PRESS
Press the bearing into the upper extender with the extended race facing out of the bore.
Press into the extender until fully seated.
Press the bearing into the lower extender with the extended race facing out of the bore.
Press into the extender until fully seated.
1
2
1
2
EXTENDER BEARING PRESS
