14.
15.
Fit the housing from the rear shifter along the head tube and through the bolt-on cable stops on the bottom
of the top tube. There are three bolt-on stop groups on the bottom of the top tube to which the housing and
brake line can be attached, each with two positions to secure housing. Fit the rear housing line along the top
tube through these stops, using the position closest to the drive side. next, route the housing around the
outside of the seat tube on the drive side and down the drive side seat stay. Attach the housing using the
two bolt-on cable stops on the top of the seat stay. loop the housing into the derailleur to finish.
Caution: the failure to properly route shifter housing can cause malfunction of the shift mechanism and
unexpected shifting of gears.
Cable setup
The DJ has full cable housing. By using full cable housing, we have eliminated break points
in the line of your shifter housing. This allows riders to experience better overall shifting
performance by reducing the entrance of unwanted elements such as sweat and sediment.
use of full cable housing helps prevent corrosion from the elements and keeps the shifting
smoother for a longer period of time.
yeti tips
01. rear derailleur
The rear brake line loops across the head tube and runs through the three bolt-on cable stops on the non-
drive side of the top tube. use the position closest to the non-drive side on the cable guides for the rear
brake line. next, route the brake line around the seat tube and down the non drive side seat stay. use the
two bolt-on cable guides on the bottom of the seat stay to secure the line. Ensure the line is finished on
the inside of the seat stay when attached to the caliper body. This will prevent the brake line from being
compromised if the bike or rider falls.
02. rear brake
