USE OF PRODUCT
Power supply of pedals RF-1 from the battery type 6F-22, which is
installed under the bottom cover of the pedal, or from an external
source of stabilized voltage 9V.
Turn on the power from the battery,when connecting the Jack
(mono only) to the input Jack, so to prolong the battery life, do not
leave Jack in the input connector.
Connect the DC adapter Jack (6) or the battery.
Connect the pedal as shown.
Turn on the amplifier.
LEVEL
control, set the volume level when the effect is activated.
Rotate the knob until you get the necessary
SUSTAIN
decay of
sound.
ATTACK
control to adjust the attack at the time of plucking
the strings. For tone control pedal is equipped with a regulator
TONE
. When installing the
TONE
knob in the middle position close
to the original sound.
3
OLDIE
S
R
Amplifier
RF-1
Bass Guitar
Adapter 9V DC
