USE OF PRODUCT
Power supply of pedals BB-1 from the battery type 6F-22, which is
installed under the bottom cover of the pedal, or from an external
source of stabilized voltage 9V.
Turn on the power from the battery,when connecting the Jack
(mono only) to the input Jack, so to prolong the battery life, do not
leave Jack in the input connector.
Connect the DC adapter jack (5) or the battery.
Connect the pedal as shown.
Turn on the amplifier.
Set the knob
BOOST
to the minimum position, knobs
HIGH-CUT
and
LOW-CUT
in the maximum position. This provides a linear
frequency response.
Turn on the amplifier and pedal. When you turn the pedal LED
lights up.
Rotate the knobs adjust the sound you need.
OLDIE
S
R
Amplifier
BB-1
Guitar
3
Adapter 9V DC
