background image

12

The device is designed to be used at temperatures of -10 – +40°C. Coldness may 

impair the battery capacity. Do not subject the device to great temperature variation 

to prevent condensation inside the device.

The device includes an integrated rechargeable battery, which cannot be removed. 

You should not dispose of the device with household waste. Instead, return it to the 

place of purchase or to a recycling point. You can check the location of the nearest 

recycling point from the local waste management authorities. Do not attempt to 

remove or modify the battery as this may damage the device and create a hazard. 

Only use standard undamaged chargers. Avoid using excessive force when plugging 

the connector into a port.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by turning the equipment 

off and on, the user is encouraged to try to correct the interference by one of 

the following measures: Reorient or relocate the receiving antenna. Increase the 

separation between the equipment and receiver. Connect the equipment into an 

outlet on a circuit different from that to which the receiver is connected. Consult the 

dealer or an experienced radio/TV technician for help. 

FCC Caution: To assure continued compliance, any changes or modifications not 

expressly approved by the party responsible for compliance could void the user’s 

authority to operate this equipment. (Example - use only shielded interface cables 

when connecting to computer or peripheral devices).

FCC Radiation Exposure Statement

This transmitter must not be co-located or operating in conjunction with any other 

antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation 

is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept 

any interference received, including interference that may cause undesired operation.

This product meets applicable national SAR limits of 1.6W/kg. The specific maximum 

SAR values can be found at yepzon.com/support. When carrying the product, or using 

it while worn on your body, either use an accessory such as a holster or otherwise 

maintain a distance of 0,5 cm from the body to ensure compliance with RF exposure 

requirements.

Summary of Contents for Smart Tracker














Reviews: