1.4
LOCATING YOUR GEAR AFTER A CUTAWAY
During a skydive day your Yepzon One is Awake. So
every 20 min it will give an update. The position is
not accurate unless you click on Update Location at
the bottom of the screen in the mobile app.
In the case of a cutaway first change the interval to
a higher rate for both the Awake and Sleep mode.
At least 5 min or higher. The new settings will be
applied at the next connection (probably within 20
min)
Now press the Update Location button to get an
accurate position of your gear. This will be
established in less than 20 minutes or when the new
settings are applied within 5 minutes.
Once the Yepzon One is located you will get a
notification on your phone and you see a location
pin in your screen. After receiving an accurate
location you can turn the interval lower again to
Awake 20 min and Sleep 4 hours.
The blue dot is your current position. Now you can
navigate to your main using the app.
If the free bag of your reserve is not attached to
your main canopy, you can find the free bag in the
line of your main canopy location and your reserve
opening location. This is upwind from the main
canopy location. To determine your reserve opening
location you can look at videos or retrieve the data
from your smart altimeter or FlySight GPS.