5.2
Installation of the large wheels
1
Disengage the trailer's brake.
2
Press the central unlocking button and insert the wheel
into the wheel holder on the frame
(fig.5)
.
3
Push the wheel backwards as much as possible and release
the locking button.
4
Check whether the wheel is correctly secured by pulling it
outwards.
5
Repeat the above steps for the other wheel.
6
Regularly check the tyre pressure: it must be between
2.1 and 2.5 bar.
5.3
Installation of the wheel holder and drawbar holder
1
Fold both side bumpers as far as possible downwards in
the horizontal position until they click and lock.
2
Next, install the wheel holder
(fig.6)
and the drawbar
holder
(fig.7)
.
5.4
Installation of the buggy wheel and drawbar
Install the buggy wheel when you use the Yepp trailer as a buggy
(see A in the fig.8)
. Install the drawbar when you use it as a bicycle
trailer.
(See B in the fig.9)
5.5
Installation of the buggy wheel
•
Insert the shaft of the buggy wheel from the bottom side in
the hole of the Yepp trailer
(fig.10)
.
•
Insert the locking pin in the hole on the side so that the pin
falls in the slot of the wheel shaft.
Ensure that the pin is inserted through both holes.
•
Pull the locking spring around the protruding part of the pin
on the other side
(fig.11)
.
•
Check whether the wheel is correctly secured by pulling it.
•
neVeR
use the buggy wheel without the locking pin.
5.6
Installation of the drawbar
1
Insert the drawbar from the front side into the hole under the
Yepp trailer. Ensure that the S-form points to the right when you
are standing in front of the trailer
(fig.12)
.
2
Insert the locking pin in the hole on the side so that the pin
goes
through
the drawbar and protrudes on the other side.
3
Pull the locking spring around the protruding part of the pin
(fig.11)
.
4
Check whether the drawbar is correctly secured by pulling it.
5
neVeR
use the drawbar without the locking pin.
5.5
putting away the buggy wheel
The Yepp trailer is equipped with a useful clamp for the buggy wheel.
If the trailer is used as a bicycle trailer, you can easily put away the
buggy wheel on the side of the trailer. Ensure that the buggy wheel is
secured correctly in the holder (clicks in place)
(fig.13)
.
5.6
putting away the drawbar
The Yepp trailer is equipped with a drawbar holder on the outside of
the trailer. If the trailer is used as a buggy, you can easily put away
the drawbar on the side of the trailer.
First insert the drawbar in the loop on the side of the trailer
(fig.14)
and, next, click the other side in the holder and secure it using the
Velcro belt. Ensure that the rivet on the bottom side of the drawbar
remains behind the bracket; this will ensure that the drawbar cannot
slide to the front
(afb.15)
.
User manual Yepp trailer solo and Yepp trailer duo
EN
Summary of Contents for solo
Page 1: ...1 2 3 5 4 6 7 EN15918...