Copyright © 2021, Fast ČR, a.s.
Copyright © 2021, Fast ČR, a.s.
Revision 04/2021
Revision 04/2021
EN
To insert a memory disc, proceed according to the
following steps.
A
First, remove the frame centre by pressing and
pushing into the notch marked by “PUSH” on the portable
frame bottom. Remove the centre by pushing the USB-C
connector side
B
Carefully insert your memory disc into the slot so that
the locks are engaged at an angle of 45 degrees. Then ca-
refully press your memory disc against the portable fra-
me centre and secure with the rubber locking plug.
C
Insert the centre with your memory disc in the alumi-
nium wrapping to make an initial condition before separa-
ting the central part from the wrapping.
1
2
4
3
5
6
PUSH button to separate the central part from
the aluminium wrapping
Rubber plug to lock the memory disc
Memory disc lock openings
M.2 memory disc slot
LED indicator
USB-C port for PC connection
D
Connect the USB-C port to your PC with the connecti-
ng cable. Wait until the device is detected.
Caution:
Please verify the compatibility of your hard
drive with the memory disc portable frame. Before han-
dling your memory disc, get familiar to the procedure re-
commended by the memory disc manufacturer. This will
prevent damage to your disc.
The case is suitable for type 2280, 2260, 2242, 2230 SSD
discs.
Specifications:
Chipset RTL9210B
|
Material: Aluminium
|
Cable Length: 30cm
|
Dimension: 45x24x10mm
|
Weight: 35g
System requirements:
MacBook (USB Type C) OS X System
|
Chromebook Pixel
|
Linux
|
Windows 10/8.1/8/7
Warning:
Owing to a number of portable devices on the market, full
compatibility with all devices cannot be guaranteed.
Avoid breaking the connector by moving to sides and do
not connect/pull it under angle. When disconnecting, al-
ways pull the connector from the device towards surroun-
ding space. The connector in your portable device as well
as the external box connector itself may be damaged if
handled without care.