![background image](http://html1.mh-extra.com/html/yenkee/ysp-3001/ysp-3001_user-manual_3285892006.webp)
EGGO BT MINI LOUDSPEAKER
Copyright © 2013, Fast ČR, a.s.
Revision 04/2013
4
-EN
IV. Specifi cations
Model:
YSP 3001
Bluetooth specifi cations:
Bluetooth V3.0+EDR (A2DP)
Transmission range:
≤ 10 m (depends on the operating environment
and the devices being connected)
USB charging voltage:
DC (direct current) 5V - 500mA
Built-in battery:
Lithium battery 400 mAh
Output power:
3 W
Frequency response:
90 Hz - 20 kHz
Sensitivity:
80 dB ± 2 dB
Signal-to-noise ratio (SNR):
≥ 76 dB
Product dimensions:
56 x 57 mm
Weight:
145g
V. Included contents:
Mini
loudspeaker
3.5mm audio cable combined with a USB power supply
User's
manual
VI. Installation
1. Turn the power supply.
Move the power switch to the ON (on) position - the loudspeaker will beep
a blue indicator light will start fl ashing.
2. Connect the mini loudspeaker via Bluetooth.
As soon as the loudspeaker is turned on, it will automatically switch to
pairing mode. Make sure that the Bluetooth function is activated on the
device being connected to. After fi nding the mini loudspeaker in the
Bluetooth device list under the name "YSP3001", allow the loudspeaker
to pair (connect). You do not need to enter any code during the pairing
process. After pairing is complete, the blue indicator light will fl ash
slowly and the mini loudspeaker will also make a beep. If it is unable to
detect any Bluetooth devices within 5 minutes, the loudspeaker will turn
itself off. To start scanning, turn it on again.