Installing and Connecting the OSICS Multifunction Platform
OSICS User Manual
23
2.3
Handling OSICS Modules Into the OSICS Mainframe
OSICS modules can be installed in the OSICS Mainframe in any of the available 8 channel-
slots and in any combination alongside other types of modules supported by the OSICS
platform.
2.3.1
Installing an OSICS Module Into the OSICS Mainframe
Subject
This section explains how to install an OSICS module into a empty slot of the
OSICS Mainframe. All OSICS modules can be installed in any of the available 8-channel
slots of the OSICS Mainframe and in any combination alongside other types of OSICS
modules.
Before Starting
•
Open the package with care and remove the OSICS module from its packaging.
•
Make sure you have a medium-small size flat blade screwdriver.
Procedure
1.
Turn the OSICS Mainframe off (see section
Turning Off the OSICS Multifunction
) and unplug the power supply cable.
2.
Unpack the OSICS module from its wrapping.
3.
On the OSICS Mainframe front panel, remove the cover plate of the slot where you
want to install the module: loosen the captive screw using a medium-small flat blade
screwdriver and remove the plate.
Figure 4: Module Installation – Plate Removal
IMPORTANT
When unpacking, handle the device with care and do not damage
the original shipping container in case the OSICS module needs to
be returned to
Y
enista Optics
.
Do not perform any hardware installation or maintenance operation
while the system is in operation.
CAUTION