Turning On/Off and Initializing the OSICS Multifunction Platform
36
OSICS User Manual
3.5
Turning Off the OSICS Multifunction Platform
Before Starting
Disable the light source of all modules (see section
Enabling/Disabling the Light Source of
)
Procedure
1.
On the front panel, press the on/off button (see
).
The message
Saving Configuration
appears on screen. It indicates that the
current system configuration is being saved in the STARTUP memory (the STARTUP
configuration will be loaded at the next system start)
2.
Wait until the green LED of the on/off button lights off.
3.
On the rear panel, set the power switch to
O
.
4.
If you want to turn on the OSICS Mainframe again, wait at least 30 seconds.