4
5
www.yellowtec.com
I
www.yellowtec.com
I
PUC² Front Panel
plug n‘ play
Ready, Set up, Go !
So what‘s in the box? Your PUC comes with a USB Y-Cord to interconnect with
your PC or MAC.
Simply interconnect PUC with your computer ( Mac / Windows/Linux ) using
the USB Y-Cord. Make sure both USB A-Plugs (yellow and black) are connected
to your PC. The yellow connector carries no data but will be needed to secure
sufficient power supply.
When connecting the PUC for the first time to your PC or Mac your system will
perform an automatic USB device installation. Your device will be identified
as YELLOWTEC PUC. (For using PUC with high-res audio (192KHz) you need to
install the ASIO driver suite for windows from www.yellowtec.com)
The green Rdy LED will indicate a proper connection.
You can now use PUC in native mode.
AES 3 Input
The AES-3 input is the
default audio input to the
PUC². This input will overri-
de any other inputs when a
digital input carrier is detec-
ted and locked, even if there
is no active audio in the
digital stream. The audio si-
gnal is converted into a USB
format and available to any
audio recording application
on the computer.
AES 3 Output
The AES-3 output is
always active at the
sample rate selected
by the application
running the computer
ZLM LED
Red indicates „Zero
Latency Monitoring“
(See advanced ope-
rations)
ZLM Jack
In order to route the input
signal directly to the
output you can apply an
external contact closure.
This bypasses the OS ker-
nel for true Zero Latency
Monitoring.
AUX Output
The stereo 3.5mm jack
supplies an analogue au-
dio signal for monitoring.
It can be used to drive a
set of headphones, alt-
hough there is no control
of the AUX output level.
*
Note that PUC Lite comes
without an AUX out
.
RDY LED
Green indicates proper
connection and wor-
king. Red indicates the
activation process when
you connect PUC² to the
computer
PUC² Front Panel
*
Host
Power Supply
5V DC power supply
adapter
