Yellowtec m!ka Series, Briefing Book

Page: 45 / 48

45
Page 29
­ To secure proper upright positioning of the m!ka Bushing drill a hole with a
minimum diameter of 22 mm.
­ The thread of the bushing is metric; should you ever need to replace the nut make
sure you use the correct M20x1,5 thread.
Page 30
­ Use an Allen key to fix the MMS Pole Adapter properly.
­ Use a yellow spacer with the MMS Pole Adapter.
Page 31
­ Never use the m!ka Table Clamp on curved surfaces ­ it may slip off!
Page 33
­ You do not need to drill a central hole when you use a m!ka Table Top Mount.
­ Make sure you have suitable screws for the type of panel you install the base ring to.
Page 34
­ When installing the m!ka Wall Bracket it is your obligation to verify that your wall and
your fasteners are suitable to hold the load.
­ Use a yellow spacer.
Page 36
­ Make sure the m!ka Pad­Dock is properly oriented to support the tablet.
­ In order to hold the tablet properly its size needs to be min 160mm and max 300mm.
­ Tablets will fit at both landscape and upright orientation.