4
3.
Screw your antennas into each of the two antenna ports
1.4
Connect to the Network
1.
Underneath the LCD screen, flip the switch to ‘SETUP’
2.
Your camera’s screen should turn on and display the camera’s view
a.
If the screen does not turn on and you are using new, fully-charged batteries, then
something is awry, please call us.
3.
While the camera is searching for signal and synching with the server, you will see
‘Searching…’ or ‘GPS Searching…’ in the top left of the screen. This process may take 3
minutes to complete. If your camera displays ‘No Signal’ and you’ve activated a data plan
at my.yellowstone.ai, then turn the camera off for ten seconds, then up to setup mode to
initiate a new search for signal. You may need to do this up to five times. After five tries,
call us for help.
1.5
Receive Your First Image
1.
After your camera connects to a cellular network, it will be ready to take and send pictures
to your phone/computer.
2.
To send a test picture, press the ‘OK’ button while the camera is in ‘SETUP’ mode and
connected to the network. Your camera will display “Sending…” then “Send Succeed.”
Refresh the media/images tab on your Yellowstone.ai Command Center account to verify
that your picture has been sent.
If you are having issues sending or viewing pictures, please visit
https://yellowstone.ai/troubleshooting
or call us.