yellow jacket Stun Gun, Product Manual

Page: 7 / 209

If the phone begins to charge, your phone is
properly seated into the phone. If it does not
begin to charge your phone, make sure your
Yellow Jacket Case battery is charged and
repeat steps 1 – 3 again.
Step 5. To remove your phone from the
case, repeat step # 1 then carefully slide your
phone up and out of the case. Once it has
been removed repeat step # 3 to secure the
locking hood into the closed position.
LED Indicators:
Stun Gun Safety Switch: When the Stun
Gun Safety Switch (located on the side of the
case) is moved forward to the activation
position, the RED LED directly below it will
illuminate. This indicates that the HVG has
been energized and is in standby mode.
Stun-Ready Indicator: When the Stun Gun
Activation Switch is moved forward to the
stun-ready position, the RED light will “glow”
through the switch/tab indicating the
Yellow Jacket® is ready to be discharged.
Bluetooth Connection Indicator:
When the
Bluetooth Transmitter Module is activated by
moving the Stun Gun Safety Switch (located
on the side of the case) forward to the
activation position, the Bluetooth
Transmitter Module will power on and
attempt to connect with your phone. A
single LED indicator located on the back of
your phone to the right of the four (4) LED
Charging Indicators will illuminate RED.