Heat Pump Kit 5/16”
61040
Manual for Operation
OMNI
™
Vacuum Gauge Operating Instructions:
1. Press the ON/OFF button to power on the gauge.
2. To manually power off the gauge, press and hold the ON/OFF button until
the screen displays the “YJ” logo.
3. To change a setting:
• Tap the corresponding button to highlight the current setting
• Continue to tap this button until the desired value is displayed
• Press and hold this button to confirm the new setting – the highlighting
will disappear when the setting has been confirmed
DISPLAY:
Select from several notification options. To change the back-
ground, press and hold for three seconds to inverse LCD mode.
ON/OFF:
Power on and off, select from four different auto-off settings.
TARGET
UNITS
DISPLAY
ON/OFF
*TARGET
- Select from five
preset vacuum level targets.
*UNITS
- Select from four
different vacuum units.
Auto-Off Timer
(in minutes)
Target Vacuum
Level
Audio
Notification
Notification
Icon
Vacuum
Unit
Vacuum Level
(displays bar
graph until deep vacuum reached)