1. Over-torque (110% of max.
torque range) could cause
breakage or lose accuracy.
2. Do not shake violently or
drop wrench.
3. Do not use this wrench as a hammer.
4. Do not leave this wrench in any place
exposed to excessive heat, humidity or
direct sunlight.
5. Do not use this apparatus in water (it is not
waterproof).
6. If the wrench gets wet, wipe it with a dry
towel as soon as possible. The salt in sea
water can be especially damaging.
7. Do not use organic solvents, such as alcohol
or paint thinner when cleaning the wrench.
8. Keep the wrench away from magnets.
9. Do not expose this wrench to dust or sand
as this could cause serious damage.
10. Do not apply excessive force to the LCD
panel.
11. Apply torque slowly and grasp the center
of the handle. Do not apply load to the end
of handle.
2
ATTENTION:
To maintain accuracy,
a one-year periodic recalibration is
recommended. Please contact your
local Calibration Laboratory to arrange
for calibration.
MAINTENANCE AND
STORAGE
CAUTION:
This manual will help you use the
many features of your new digital
torque wrench. Before operating the
torque wrench, please read this manual
completely, and keep it handy for future
reference.
FEATURES:
• Interchangeable head
• Digital torque value readout
• +/- 2% accuracy
• CW and CCW operation
• Peak hold and track mode selectable
• Buzzer and LED indicator for the 9 pre-set
target torques
• Water contact indicator
• Engineering units (ft-lb, in-lb, N-m, kg-cm)
selectable
• 50 data memory for recall and joint torque
auditing
• Auto sleep after about 5 minutes idle
• (2) AAA batteries included
BATTERY MAINTENANCE:
1. When the wrench is not used for an
extended period of time, remove the battery.
2. Keep a spare battery on hand when going
on a long trip or to cold areas.
3. Do not mix battery types or combine used
batteries with new ones.
4. Sweat, oil and water can prevent a battery’s
terminal from making electrical contact.
To avoid this, wipe both terminals before
loading a battery.
5. Dispose of batteries in a designated
disposal area. Do not throw batteries into
a fire.