Yellobrik OTT 1412 Quick Reference Download Page 2

Connections

The SDI video input is connected to the 75 Ohm BNC connections (up to 

12G).  The fiber connection is LC Duplex SMF (Singlemode).  An example 

of the LC connector shown below (fiber Optic cable and LC connectors 

are not supplied).

Use the included dust plug to protect the optical connection from dust.

Operation

The OTT 1412 supports any SDI video signal from 270Mbit/s to 12Gbit/s.  

Maximum distance is 10km (6.2 miles)*.  Data transmission activity is 

indicated by the TX LEDs on the side of the module. 

T

he module has two identical (and fully independent) channels.  

Operation is fully automatic. For reception, the received SDI format is 

detected automatically and provided on the optical output connection 

(up to 12G). The module supports hot swapping and hot plugging of 

connections. No user settings are provided for this module.

 

Note:

  If TX LED is OFF this indicates no SDI input is present, or the input signal is 

not valid. 

Note:

 OTT 1412 is identical in terms of mounting and securing 

Note: 

The module is designed for use with SMF 

(Singlemode) fiber cable. While it is possible to 

use Multimode cable, performance (distance) is 

greatly degraded and not guaranteed.

Power

The module requires a clean 12V DC (7-24V DC) power source. An LED is 

provided to confirm power is connected. A 12V DC power supply is 

included with the module. If you are applying your own power source, 

please provide a clean, 7-24V DC power source.  Power consumption 

information can be found in the technical specifications table.

Optional Mounting Brackets

The optional RFR 1001 mounting brackets can be 

used to permanently mount the modules on any 

flat surface or on 19‘‘ rack rails.

Power Lead Strain Relief

The modules have a small hole in the case located above the power 

connection to prevent the power lead being accidentally pulled out.  

Use the supplied tie-wrap and secure the lead as shown below.

The optional RFR 1000-1 rack mount can be used to permanently

mount up to 14 yellobrik modules. In addition, the RFR 1000-1 can 

provide full power redundancy for all mounted yellobriks.

Reviews: