19
General note:
A useful tool when in doubt is the regular long UV fluorescent test.
Lab grown diamonds do not show, in general, a reaction to exposure of
a regular jeweler's UV light.
So in case of a doubt- if a stone shows fluorescence under your regular
UV light- it is most likely a natural diamond.
Modes
At the end of the test you will get the result. On the top of the screen
you see 4 headers.
RESULT, ORIGINAL PICTURE, GLOWING PICTURE, COLORED PICTURE.
You can see the press EACH header of the results screen.
"Result"- At the end of the test you will see the results of the test. If you
have pressed any other header - press the "result" again to go back to
see the result of the test.
It combines the final test results. There is no need to go to the other tabs
but for your convenience – you can see them.
"Original picture" - Press “ORIGINAL PICTURE” to see the original picture
without any markings.
"Glowing picture" - Press “GLOWING PICTURE” to see the diamonds glow
in the dark. The diamonds that glow in the dark are Lab Grown diamonds
that are marked in red with our software.
Sometimes it is easy to see them when they glow in the dark.
"Colored picture"- Press “COLORED PICTURE” to see the diamonds shine.
You can go back and forth between the 4 positions.
At the end of the test you can go back by pressing the ARROW or save
the results by pressing the MEMORY CARD icon.