Product Accessories Diagram
Installation Diagram
A. Front Lever
B. Back Lever
C. Square Bar
80
D. Square Bar
100
E. Back Baffle
F. Front Baffle
G. Front Cover
H. back Cover
I. Connecting
Rod Screw*2
G. Connecting
Rod Stud*2
K. Connecting
Rod Nut*2
L. Bamboo Screw*2
M. Screwdriver
N. Scoop-Proof
Handle Latch
O. Pinch Plate
P. Self-Tapping
Screw*4M4*20
Q.Countersunk
Screw*4M4*8
R. Door Cad*3
S.Rubber Plug*2
T.Square Bar Spring
U.Auxiliary Ring
Installation Steps
1. Prepare the Door Prep
1）After confirming that the original lock-door has the Upper and Lower
Panels both inside and outside, remove the existing latch.
2) Check the thickness of the door and the size of the door prep, and
record them.
3)Prepare door&frame.
Necessary only for new doors or adjust existing prep.
Use template to mark holes on door,and open a hole with a tool
Diameter<2-1/8"(54mm)
2. Install Handle Latch
Adjust the length of the handle latch according to the door margin; install
the handle latch. NOTE: square bar hole must be vertical.
3. Install Pinch Plate
For scenes of newly installed door or re-installation requirement only.
2-3/8"(60mm)
2-3/4"(70mm)
4. Assemble Outside Lever
1) Assemble front cover and connecting rod nut and note: the center hole
of the front cover must be concentric with the square hole of the handle
latch.
2) Assemble outside lever
Fix the front cover plate on the lever with countersunk screws.
Connecting Rod Nut
Connecting Rod Screw
Front Cover
Countersunk Screw M4*8
5. Install Front Lever
1) Confirm whether front or back baffle is needed according to the size of
door prep, cut bamboo screws according to the door thickness, ensure
that the screw length is less than the door thickness by 10mm at most.
2) Install auxiliary ring and square bar, identify the fingerprint on front
lever, turn the Lever to test whether it is flexible and handle latch shrinks
smoothly. If it is stuck, please check that if the installation is dislocated.
Remove the auxiliary ring after the installation is confirmed correct.
Auxiliary Ring
Square Bar
6. Install Back Lever
Choose square bar according to the door thickness. Assemble the square
bar spring into the center square hole of the back lever before installation.
Fix the screw and paste the rubber plug.
7. Testing Operation
After installation, turn the back lever to check whether it is flexible and the
handle latch shrinks smoothly. If it is stuck, please check whether the lever
installation is dislocated.
Congratulations, you have successfully installed the YEEUU Fingerprint
Lock!
YEEUU Smart Fingerprint Lock R2
Hangzhou Ujia Technology Co., Ltd.
Made in China
Download APP
1. Open Google play or App Store.
2. Download and install “YEEUU” App.