6
1.Remove the SD Card
Remove/Insert the SD card
In this manual, "Micro SD card" is referred to as "SD card" unless otherwise noted.
※
This dash cam supports micro SD cards of 8 GB or more and 256 GB or less. (SD
write speed U3 or higher)
Warnings
If the optional multi-battery or power supply unit with voltage monitoring function is
connected, disconnect the power cord from the main unit first.
Turn off the car's engine.
Push the SD card in, let it pop out a little, then pull it out.
After turning off the power, make sure that the power LED is off for
at least 3 seconds.
※
Please be careful not to lose the SD card when it pops out.
※
The SD card is so small that if dropped in the car, it may get into the
space between the seats.
・
After turning the power off, make sure that the power indicator LED (Red) is off
for at least 3 seconds before the next process.
・
The SD card can only be inserted in one direction. Insert the SD card as shown
in the figure below. Pushing the card in forcibly may damage the dash cam.
・
Please ensure to format SD cards before using them in the dash cam.
1-1
1-2
