Gigaset IP Phone Configuration Guide
17/22
For Maxwell 10
Configuring N510 IP PRO with MyPBX.
Environment
This configuration guide is based on the following versions:
Maxwell 10: 1.30
MyPBX: X.19.0.47
Configuration Steps
1. Connecting the Maxwell 10
Configure the network settings and enable its Web UI on the Maxwell 10 display.
Please assign a static IP which is in the IP segment with MyPBX for Maxwell 10 on its
Settings menu. Meanwhile, enable the Web UI option.
2. Configuring the call control
Log in the Web UI of Maxwell 10 and configure the phone systems.
Go to the menu (Network and Connections>Phone Systems), select the phone
system as “Asterisk”.
For call control, please check the following settings:
Calls via Call Manager: No
Incoming Calls without Call Manager: No
Outgoing Calls via function key: Execute call via handset.
Note:
these settings are suitable for the handset on Maxwell 10. If you want to use the
Gigaset DECT handset to make and receive calls, please refer to its user guide to
configure the call control.
