manualshive.com logo in svg

Yeastar Technology TA3210, User Manual

Share
Download
Yeastar Technology TA3210 User Manual Download Page 8

TA3210 User Manual

8/66

Calls from PSTN to SIP

1) Create an inbound route on your SIP server, and select the SIP trunk you

have registered just now.

2) Configure a “Port->IP” route on TA3210, choose a PSTN trunk or PSTN trunk

group in the field “Call Source”, and choose the SIP account in the field “Call
Destination”.

3) When a call comes to PSTN trunk on TA3210, the call will be routed to the

destination of the SIP server inbound route.

Register SIP account on IP phone

With account mode, you can directly take the SIP account to register on your SIP
phone or softphone; then make calls from softphone through PSTN trunk on
TA3210 and receive incoming calls on your SIP phone or softphone. In this way,
you don’t have to set up any SIP server.

VoIP Mode

Take a SIP account from your SIP server, and register it on TA3210 as a VoIP trunk. In
this way, TA3210 and your SIP server are connected.

Calls from SIP to PSTN

1) Configure a IP-> Port route on TA3210; choose the VoIP trunk in the field “Call

Source”, and choose PSTN trunk in the field “Call Destination”.

Enable

Two-stage Dialing

on the route.

2) Make a call from your SIP server, dial the SIP account number which is

registered on TA3210. You will hear a dial tone, then dial the external number
out through PSTN trunk.

Calls from PSTN to SIP

1) Configure a Port->IP route on TA3210, choose PSTN trunk in the field “Call

Source”, and choose the SIP trunk in the field “Call Destination”.

2) When an incoming call reaches PSTN trunk on TA3210, you will hear a dial

tone, then dial an extension number of the SIP server.

SPS Mode

(Recommended)

Create a Service Provider SIP trunk on TA3210 to connect to your SIP server. Add
another Service Provider SIP trunk on your SIP server, connecting to TA3210.

Calls from SIP to PSTN

1) Create one outbound route on your SIP sever, and select the SIP trunk you

have created just now.

2) Configure a IP->Port route on TA3210, choose the SPS trunk in the field “Call

Source”, and choose PSTN trunk in the field “Call Destination”.

3) Make a call from your SIP Server and the call should match the outbound

route dial rules.

Summary of Contents for TA3210



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands