NeoGate TA FXS Gateway Quick Installation Guide
http://www.yeastar.com 12/12
2. Outbound and inbound calls
Users should be able to make and receive external calls after configuring FXS ports, VoIP Trunk, and dial
pattern. Please refer to Administrator’s Guide for details.
4.5 Reset to Factory Defaults
To reset to factory defaults, you could follow the below instruction:
Press the “RESET” button located in the back panel with a paper clip or a pencil tip. You can see the RUN
indicator stops flicker and turns solid. When the RUN indicator turns off, the button could be released and
system begins to reset. During the process, please do not power off until the RUN indicator become normal
which means the reset process is completed.
Note: After resetting, all the configurations made by the admin would be erased.
5. Conclusion
This Installation Guide only explains the installation and basic settings of NeoGate TA Series. For more
functionality and advanced settings of NeoGate TA Series, please refer to the relative documents as below:
“NeoGate TA FXS Gateway Datasheet”
“NeoGate TA FXS Gateway Administrator’s Guide”
[The End]
