| Content Sharing |
28
Wireless Content Sharing
You can use Yealink WPP20 wireless presentation pod for wireless content sharing. Before content sharing, you
should pair the WPP20 with the MShare and then connect it to the computer.
•
Pairing the WPP20 with the MShare
•
•
Stopping Sharing Content via WPP20
Pairing the WPP20 with the MShare
Procedure
1.
Connect the WPP20 to the USB port of the MShare.
2.
Wait for about 3 seconds, and the WPP20 LED indicator glows solid green.
The WPP20 is paired with the MShare successfully.
Sharing Content via WPP20
Before you begin
Make sure the WPP20 has paired with the MShare.
Procedure
1.
Connect the WPP20 wireless presentation pod to your computer.
2.
If the WPP20 is first connected to the computer, you need to manually start the Yealink Wireless Presentation Pod
software from
This PC
in Windows 10 or from
My Computer
in Windows 7 and then upgrade the WPP20.
• After starting the software, if it prompts that the firmware is different from the host version, you need to
upgrade the WPP20 according to the prompts.
• For older versions of WPP20, after starting the software, you need to manually upgrade the firmware on the
software at the path ->
Version Update
.
After the upgrade is successful, the WPP20 is ready for content sharing.
3.
Do one of the following:
• On the WPP20, press the presentation button to share the full screen.
• On the WPP20, long press the presentation button for 3 seconds and then release this button. Select the file or
the window you want to share and then click
Start Sharing
.
• On the Yealink Wireless Presentation Pod software, click
Contents Share
and choose the file you want to
Summary of Contents for Zoom Rooms CP960-UVC
Page 1: ......
Page 4: ...The display does not display the shared content 41 ...
