4
Quick User Guide—Yealink SIP T-46G - T42G - T41P
Managing the Contact Directory
To access your directory:
1. Press the
Dir
softkey when the phone is idle.
2. Select the desired contact group.
3. Press the
Enter
softkey.
To add a contact:
1. Go to your directory.
2. Press the
Add
softkey to add a contact.
3. Enter the contact’s information.
4. Press the
Add
softkey to accept the change.
To edit a contact:
1. Go to your directory.
2. Press
or
to select the desired entry.
3. Press the
Option
softkey.
4. Select
Detail
, and edit the contact information.
5. Press the
Save
softkey to accept the change.
To delete a contact:
1. Go to your directory.
2. Press
or
to select the desired entry.
3. Press the
Option
softkey.
4. Select
Delete
.
5. Press the
OK
softkey at the deletion prompt.
Listening to Voicemail
If you have new voice messages, a notification on the
idle screen indicates that one or more voice messages
are waiting.
To listen to voice messages:
1. Press
or the
Connect
softkey.
2. Follow the IVR to listen your voice messages.
Muting the Microphone
• Press
to mute the microphone during a call.
• Press
again to un-mute the call.
Using Do Not Disturb (DND)
Press the
DND
softkey when the phone is idle. The
icon on the status bar indicates that DND is enabled.
Adjusting Volume
• Press
during a call to adjust the
receiver volume of the handset/speakerphone/
headset.
• Press
when the phone is idle to
adjust the ringer volume.
Accessing Call Queues (If Enabled)
1. Press the
CQueue
softkey when the phone is idle.
2. Follow the IVR to log in to or out of the call queue.
Updating Ringtones
1. Press the
Menu
softkey when the phone is idle.
2. Go to
Basic
>
Sound
>
Ring Tones
.
3. Press
or
to select
Common
or the desired
account, and then press the
Enter
softkey.
4. Press
or
to select the desired ring tone.
5. Press
OK
or the
Save
softkey to accept the change.
Recording Calls (If Enabled)
1. Press the
Rec
softkey during a call. A message
announces that call recording has started.
2. Press the
Rec
softkey again to stop recording. A
message announces that call recording has ended.
Using Barge-Monitor-Whisper (If Enabled)
Monitor
1. Dial
*22
or
*BA
before lifting the handset.
2. Press
Dial
or
Call
.
3. At the prompt, enter the extension you want to
monitor. You may be prompted for an access code.
4. Enter the access code to begin monitoring.
Important:
Dial
*22
before lifting the handset.
Whisper
1. To whisper to the agent that you are already
monitoring, dial
*9
or
*W
.
2. To exit the whisper, mute the supervisor’s audio,
and revert to silent monitor mode, dial
*6
or
*M
.
Barge
1. To barge into and join the call that you are already
monitoring, dial
*5
or
*J
.
2. To exit the barge and revert to silent monitor mode,
dial
*6
or
*M
.
Barge Direct
To barge directly into a call without monitoring first,
dial
*23
, then dial extension number. You are now
immediately in a 3-way conference call with the active
call.
