Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
288
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
features.busy_tone_delay
0, 3 or 5
0
Description:
Configures the duration time (in seconds) for the busy tone.
When one party releases the call, a busy tone is audible to the other party indicating
that the call connection breaks.
0-0s
3-3s
5-5s
If it is set to 3 (3s), a busy tone is audible for 3 seconds on the IP phone.
Web User Interface:
Features->General Information->Busy Tone Delay (Seconds)
Phone User Interface:
None
To configure busy tone delay via web user interface:
1
.
Click on Features->General Information
.
2
.
Select the desired value from the pull-down list of Busy Tone Delay (Seconds).
3
.
Click Confirm to accept the change.
Return code when refuse defines the return code and reason of the SIP response
Summary of Contents for Yealink SIP-T42G
