Yealink Yealink SIP-T20P, Quick Start Manual

Page: 9 / 38

5
E
N
G
L
I
S
H
Semi-Attended Transfer
Attended Transfer
Call Conference
Call Forward
Blind Transfer
Call Transfer
Speed Dial
To configure a speed dial key:
To use the speed dial key:
If there is more than one call on hold, press or to select the desired call, and then
press .
You can transfer a call in the following ways:
1. Press during an active call. The call is placed on hold.
1. Press during an active call. The call is placed on hold.
1. Press during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press .
3. Press when the second party answers.
To enable call forward:
Always----
Incoming calls are all forwarded unconditionally.
Busy----
Incoming calls are forwarded when the phone is busy.
No Answer----
Incoming calls are forwarded when the phone is not answered
after a preset time period.
1. Press when the phone is idle, and then select
Features
->
Forward.
2. Select the desired forward type:
3. Enter the number you want to forward to. For
No Answer,
enter the ring time to wait
before forwarding.
4. Press to accept the change.
1. Press during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press .
4. Hang up the handset to disconnect all parties.
1. Press when the phone is idle, and then select
Features
->
DSS Keys
.
2. Select the desired DSS key, and then press .
4. Press to accept the change.
Press the speed dial key to dial out the preset number.
3. Select
Speed Dial
from the
Type
field, select the desired line from the
Account ID
field, and enter
the number in the
Value
field.
conference.
3. Press again when the second party answers. All parties are now joined in the
2. Enter the number you want to transfer to, and then press .
3. Press when you hear the ring-back tone.
3. Press .
2. Enter the number you want to transfer to.